ETRTO Tire Size Chart

Learn how an ETRTO tire size chart is laid out, what the sidewall numbers mean, and how to turn an ETRTO designation into an approximate inch size.

3 min read0 views
— · 0 votes
Contents
  1. What the sidewall numbers mean
  2. How the chart rows are built
  3. Converting ETRTO to inches
  4. Questions about ETRTO tire size
  5. What does an ETRTO tire size chart show?
  6. How do I read the numbers on an ETRTO tire?
  7. How do I convert an ETRTO bicycle tire size to inches?
  8. Does an ETRTO size tell me the tire will fit my rim?

An ETRTO tire size chart lists tire sizes by their ETRTO designation, a code stamped on the sidewall that gives the nominal section width and the bead seat diameter. The chart helps you read those numbers, compare sizes across brands, and estimate an inch figure from a metric marking. It does not measure your wheel for you, but it shows what each position in the code stands for.

What the sidewall numbers mean

The ETRTO designation on a bicycle tire reads as two numbers separated by a dash, such as 37-622. The first number is the nominal section width in millimeters, measured across the inflated tire at its widest point. The second number is the bead seat diameter, the diameter of the wheel at the ledge where the tire bead sits. Both values are given in millimeters, and the order never changes.

How the chart rows are built

An ETRTO tire size list groups sizes by bead seat diameter, so every tire that fits the same rim ledge appears together. Within each group, rows run through the section width values, letting you see which widths are made for that diameter. The chart layout keeps the width and the bead seat diameter in separate columns so neither is confused with the other. A reader can therefore scan one column for a wheel size and the next for the tire width.

Converting ETRTO to inches

ETRTO to inch conversion starts with the bead seat diameter, not the tire width alone. Dividing the metric bead seat diameter by 25.4 gives a decimal inch figure that matches the inch size of the wheel. A 622 mm bead seat diameter, for example, corresponds to roughly 24.5 inches at the bead, which is the wheel size sold as 700c. The section width stays metric on the chart because inch labels for width are nominal and vary between makers.

Questions about ETRTO tire size

What does an ETRTO tire size chart show?

An ETRTO tire size chart shows tire sizes as a width and a bead seat diameter, both in millimeters. It pairs each nominal section width with the rim diameter it is built for, so you can compare tires that fit the same wheel. The chart also helps you find the inch equivalent of a metric wheel size.

How do I read the numbers on an ETRTO tire?

You read an ETRTO designation from left to right, with the width first and the bead seat diameter second. A marking like 50-559 means a nominal section width of 50 mm on a 559 mm bead seat diameter. The dash separates the two values, and both are metric.

How do I convert an ETRTO bicycle tire size to inches?

You convert an ETRTO bicycle tire size to inches by dividing the bead seat diameter by 25.4. The result is the approximate wheel diameter in inches, which you can match to an inch size label. The tire width is a separate figure and does not enter that division.

Does an ETRTO size tell me the tire will fit my rim?

An ETRTO size tells you the bead seat diameter and width, but fit still depends on the rim. The bead seat diameter must match the rim exactly, and the width must sit within the range the rim maker allows. Check the rim markings and the maker's guidance before mounting a tire.

Latest articles