Dual Wheel Spacing Calculation

Learn how dual wheel spacing is calculated from sidewall width and clearance, and how to check the distance between wheel centerlines on a dually truck.

3 min read7 viewsDual Wheel Spacing Calculation
— · 0 votes
Contents
  1. The spacing formula in plain terms
  2. Where the clearance is measured
  3. Reading the numbers off the tire
  4. Dual wheel spacing questions
  5. How do you calculate d spacing on a dually?
  6. What is dual wheel tire spacing calculation based on?
  7. How much sidewall clearance do dual tires need?
  8. Can I change tire size on a dually without changing the spacing?

Dual wheel spacing calculation finds the distance between the wheel centerlines of a pair of dual rear wheels, so the two tires sit far enough apart to clear each other. The number comes from the tire sidewall width plus a clearance gap, not from the wheel alone. This page explains the formula, the measurements you need and the clearance points to check on a dually truck.

The spacing formula in plain terms

Dual tire spacing adds the sidewall width of one tire to a clearance gap to set the minimum distance between the two tires. A wider sidewall needs more room, so the dual tire spacing formula scales with the tire size you fit. The wheel centerline distance is then built from that tire gap plus the width of the rims. Measure the tire you plan to run, not the one you are replacing, because a size change moves the number.

Where the clearance is measured

Sidewall clearance is the open gap between the facing sidewalls of the inside and outside tire. Measure this gap at its tightest point, which sits near the widest part of the sidewall rather than at the tread. Dual tire spacing keeps that gap open through the full range of load and heat. A gap that closes under load lets the sidewalls rub and wear.

Reading the numbers off the tire

The sidewall width you need is printed on the tire as its section width, given in millimeters on a metric size. Convert that figure to inches if your spacing is set in inches, then add the clearance gap your tire maker states for that size. Dual rear wheels are sold with a stated spacing, and the tire must fit inside it. A trained tire technician should confirm the fit before you mount a new size.

Dual wheel spacing questions

How do you calculate d spacing on a dually?

D spacing is calculated by adding the sidewall width of the tire to the required clearance gap. That total gives the minimum space between the two tires, and the wheel centerline distance follows from it. Use the section width from the sidewall and the clearance figure for that tire size. Check the result against the spacing your wheels provide.

What is dual wheel tire spacing calculation based on?

Dual wheel tire spacing calculation is based on the tire section width and the clearance gap between the facing sidewalls. Wheel width and offset set where each rim sits, and these together give the centerline distance. The tire size drives the result more than the wheel does. Changing tire size changes the spacing you need.

How much sidewall clearance do dual tires need?

Sidewall clearance between dual tires depends on the tire size and the figure the tire maker specifies for it. The gap must stay open when the tires are loaded and warm, so the tightest point is the one to check. Do not set spacing from guesswork alone. Follow the maker's stated clearance for your tire.

Can I change tire size on a dually without changing the spacing?

Tire size can be changed on a dually only if the new sidewall still fits the existing spacing with enough clearance. A wider tire takes more room between the duals, so the gap may fall below the maker's figure. Compare the section width of the new tire with the old one before buying. A tire technician can confirm whether the wheels give enough room.

Read next

Latest articles