Common Tire Plus Sizing Mistakes and How to Avoid Them
Plus sizing changes wheel and tire together. See the mistakes that spoil fitment, from diameter and load index to rim width, and how to correct each one.
Contents
- Keep overall diameter in tolerance
- Match the load index to the car
- Check rim width compatibility
- Questions about tire plus sizing errors
- What are the tire plus sizing mistakes to avoid?
- How do I fix a speedometer error after plus sizing?
- Does a bigger wheel mean a lower profile tire?
- What is tire diameter tolerance in plus sizing?
Tire plus sizing mistakes come from changing the wheel diameter without keeping the tire's overall diameter, load index and rim width in balance. Plus sizing means fitting a larger wheel with a lower profile tire so the tire's outside diameter stays close to the original. This page names the errors drivers and shops make and shows how to avoid each one with the numbers on the sidewall.
Keep overall diameter in tolerance
The most direct plus sizing error is choosing a tire whose overall diameter drifts far from the original. A wheel diameter increase must be matched by a shorter sidewall, and the sidewall size numbers on the tire show whether that balance holds. Overall diameter drives speedometer error, so a reading that drifts is a warning sign, not just a detail. Compare the calculated diameter of the new size to the factory size before you buy.
Match the load index to the car
A lower profile tire often carries a different load index than the size it replaces. The load index is a code for how much weight one tire can support at its rated pressure, and it does not follow the wheel size automatically. Check the index on the door placard and pick a tire that meets or exceeds it. A smaller sidewall can still carry the same load when the index is chosen correctly.
Check rim width compatibility
Rim width compatibility decides whether a wider wheel and a lower profile tire sit together properly. Each tire size has a range of approved rim widths, and a wheel outside that range distorts the sidewall and changes how the tread meets the road. Ask for the approved rim width range of the tire you plan to fit. Pairing a wide wheel with a narrow tire is a plus sizing error that no alignment can fix.
Questions about tire plus sizing errors
What are the tire plus sizing mistakes to avoid?
The tire plus sizing mistakes to avoid are a changed overall diameter, a load index below the car's requirement and a wheel outside the tire's approved rim width range. Each one affects fitment or handling rather than looks alone. Fixing them starts with reading the sidewall and the door placard before buying. A trained tire specialist can confirm the numbers when a size is unclear.
How do I fix a speedometer error after plus sizing?
A speedometer error after plus sizing is fixed by choosing a tire whose overall diameter matches the original more closely. The speedometer is calibrated to the factory tire diameter, so a taller or shorter tire changes the reading. Recalculate the diameter from the sidewall size numbers and compare it to the stock size. If the error remains, an electronic calibration at a qualified shop is the next step.
Does a bigger wheel mean a lower profile tire?
Yes, a bigger wheel in plus sizing calls for a lower profile tire to keep the overall diameter close to stock. The wheel diameter increase is offset by a shorter sidewall, which is what the sidewall size numbers describe. Skip that step and the tire grows taller than the original. The result is a changed speedometer reading and possible clearance problems.
What is tire diameter tolerance in plus sizing?
Tire diameter tolerance is the small amount by which a new tire's overall diameter may differ from the original without upsetting the car. It depends on the vehicle and its electronic systems, so the acceptable figure is set by the manufacturer. Staying inside that tolerance keeps the speedometer and gearing close to factory. A tire specialist can confirm the limit for a given car.