# Commercial Tire Size Chart and Dimension Comparison

Read commercial tire sizes from the sidewall and compare section width, overall diameter, rim diameter and load range across size designations.

A commercial [tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) turns the numbers molded on a sidewall into measurable dimensions you can compare. The size code gives section width, aspect ratio and rim diameter, while the service description adds [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/). With those figures you can compare two tires by width, overall diameter and load capacity before you change a wheel or axle setup. 

- Read the size code in order: section width, aspect ratio, construction type, then rim diameter.
- Overall diameter and rolling circumference decide gearing, speedometer error and clearance, so compare them first.
- Load index and load range are separate from size and must match the axle's real load demand.
- Metric and inch designations describe the same three dimensions in different formats, so convert before comparing.
- Published specification tables give measured dimensions that can differ slightly from calculated values.
 

## How a commercial tire size reads 

A commercial [tire size code](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) is a compact list of dimensions, read from left to right. A metric code such as 295/80R22.5 gives section width in millimeters, aspect ratio as a percentage, radial construction and rim diameter in inches. Learning the order of the numbers is the first step in any [tire size comparison](/articles/tire-size-calculator-diameter-comparison-material-44527/). 

The first number is the section width, the widest point of the inflated tire measured across the sidewalls. The second number is the aspect ratio, the sidewall height expressed as a percentage of section width. A larger aspect ratio means a taller sidewall for the same width. 

The letter after the slash shows the internal construction, with R standing for radial. The final number is the rim diameter in inches, the wheel size the tire mounts on. Commercial vehicle tires mix metric and inch units in one code, so read each part in its own unit. 

## Calculating overall diameter and circumference 

Overall diameter is the height of the inflated tire from tread to tread, and it follows from the size numbers. Multiply the section width by the aspect ratio to get one sidewall height, double that figure and add the rim diameter. This commercial tire size calculator method gives a working diameter you can compare across sizes. 

Rolling circumference is the distance the tire covers in one revolution, and it sets how fast the vehicle travels for a given axle speed. Circumference follows from the diameter through simple geometry. A change in overall diameter changes gearing, speedometer reading and clearance under the chassis. 

Calculated figures describe a tire on its design rim at its rated inflation, not a worn tire under load. Published data from a [tire specification catalog](/articles/actual-tire-dimensions-by-size-nominal-sizes-vs-manufacturer-specifications/) gives measured dimensions that can differ from your arithmetic. Use the calculated number for a quick comparison and the catalog figure for a final fitment check. 

## Truck tire dimension comparison table 

A dimension comparison table lines up the numbers that matter for a fitment decision. Section width shows how much room the tire needs beside the spring, the brake and the adjacent dual. Overall diameter and rolling circumference show the effect on gearing and clearance. 

Load index and load range belong in the same table because size alone does not state capacity. Load index is a numeric code for the maximum load a single tire carries at a stated pressure. Load range, often written as a letter, groups tires by their inflation and construction class. 

Comparing two candidates side by side exposes a trade you might miss in a single size code. A wider section may need more clearance while a taller sidewall changes the diameter. The table below shows the fields to record for each size you compare. 
| Field | What it shows | 
| Size code | Width, aspect ratio, construction and rim diameter | 
| Section width | Widest point of the inflated tire | 
| Overall diameter | Tread-to-tread height, calculated or measured | 
| Rolling circumference | Distance covered in one revolution | 
| Load index and load range | Load capacity class and inflation group | 
| [Rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) | Approved wheel widths for the size |  

## Metric and inch size designations 

Commercial truck tire sizes appear in two families of designation, and a size chart must handle both. Metric codes use millimeters for width and inches for rim diameter, as in 315/80R22.5. Inch codes give the nominal section width and rim diameter in inches, as in 11R22.5. 

Metric and inch size conversion is not a simple arithmetic swap, because the two formats describe the tire differently. An inch designation carries no aspect ratio number, so its sidewall height comes from the nominal dimensions of that size family. Compare overall diameter rather than matching width numbers alone. 

A tire size comparison chart that lists both families side by side lets you see where a metric size and an inch size land. Record the calculated diameter for each and check it against the catalog. The format on the sidewall tells you which units each number uses. 

## Sidewall markings beyond the size 

Sidewall markings carry more than the size code, and those extra figures matter in a comparison. The service description pairs a load index with a speed symbol, for example 152/148L on a tire built for dual fitment. The first load index applies to single fitment and the second to dual fitment. 

Ply rating and load range appear together on many commercial tires, and they are not the same measure. Ply rating is a historical indicator of carcass strength, while load range is the current letter class for inflation and load. Read the load range and the load index as the figures to compare. 

Other markings may show maximum inflation pressure, tread depth and manufacturing codes. A tire specification catalog repeats these markings in a searchable format. Photograph the sidewall before you order a replacement so the size and service description stay with you. 

## Building a size comparison you can trust 

A reliable commercial [tire comparison chart](/articles/tire-size-comparison-charts-comparing-overall-height-and-dimensions/) starts from the tire you run now and records every dimension that affects fitment. Note the size code, the service description and the measured overall diameter. Then add the rim width range and the dual spacing if the axle carries twins. 

Clearance is the limit that fails first when a size grows. Check the gap to the fender, the suspension and the brake components at full steering lock and full articulation. A wider or taller tire can touch parts that the old size cleared, and a dual pair needs enough spacing to avoid sidewall contact. 

Load capacity must be checked against the axle rating, not just the old tire. A size with a lower load index or load range may not carry the same axle weight at its approved pressure. A trained tire technician should confirm the final fitment on the vehicle. 

## Where to read specifications, not just sizes 

A tire specification catalog is the reference for measured dimensions, approved rim widths and load data. Manufacturers publish these tables per size and per product line, and they differ from the calculated figures. Use the catalog to confirm diameter and circumference before ordering. 

Catalog comparison also shows which sizes share a rim diameter and which need a different wheel. A size change that keeps the rim diameter can often reuse the wheel, while a change in rim diameter needs new wheels. Check the rim width range for each candidate size. 

Keep the comparison to the dimensions the catalog states, and do not assume two tires of the same nominal size measure the same. Tread pattern and construction can shift the measured diameter slightly. The catalog figure plus a physical check on the vehicle gives the soundest answer. 

## Commercial tire size questions 

### How do I read commercial truck tire sizes explained on a sidewall? 

A commercial truck tire size reads as width, aspect ratio, construction and rim diameter, for example 295/80R22.5. The width is in millimeters, the aspect ratio is a percentage of that width, and the rim diameter is in inches. The service description that follows adds load index and speed symbol. 

### What does a commercial tire size calculator actually compute? 

A commercial tire size calculator turns the sidewall numbers into overall diameter and rolling circumference. It multiplies section width by aspect ratio for one sidewall height, then adds twice that to the rim diameter. Treat the result as a calculated figure and confirm it against the tire specification catalog. 

### Can I compare a metric size with an inch size directly? 

Metric and inch designations can be compared once both are converted to the same dimensions. An inch code carries no aspect ratio number, so match on overall diameter and section width rather than on the code format. A size chart that lists both families side by side makes the comparison clear. 

### Why does a size comparison chart include load index as well as dimensions? 

A size comparison chart includes load index because two tires of the same size can carry different maximum loads. Load index is a code for the load capacity at a stated inflation pressure, and load range groups tires by inflation class. Matching the axle rating needs both figures, not the size alone. 

### What is the difference between ply rating and load range? 

Ply rating is a historical strength indicator that no longer states the actual number of plies. Load range is the current letter class that pairs with inflation pressure and load capacity. Compare load range and load index when you check a tire against an axle rating. 

### Does a larger overall diameter change the vehicle's gearing? 

A larger overall diameter raises the distance covered per revolution, so the engine turns slower for the same road speed. That shift affects gearing, speedometer calibration and clearance under the chassis. Check rolling circumference and vehicle clearance before changing to a taller size.
