# Commercial Tire Markings Explained

Read a commercial tire sidewall with confidence: load index, load range, ply rating, speed rating, DOT code and TIN, all explained in plain terms for fleet work.

Commercial tire markings pack a lot of information into the sidewall, and each code answers a different question about the tire. A commercial tire marking explains size, load capacity, speed capability and the date the tire was made. Learning to read these codes helps drivers and fleet staff check that a tire matches the job it is fitted for. 

- The size string shows width, aspect ratio, construction and rim diameter in one line.
- The load index and load range together tell you how much weight the tire can carry when inflated correctly.
- The DOT code ending in four digits gives the week and year of manufacture.
- The speed rating sets the maximum speed the tire is approved to run at under load.
- [Tread wear indicators](/articles/checking-tread-wear-with-wear-indicator-bars/) inside the grooves show when the tread has reached its minimum depth.
 

## What the commercial tire sidewall shows 

The sidewall of a commercial truck tire carries molded codes that describe its dimensions, capacity and origin. A tire marking for commercial drivers matters because the vehicle's legal and safe operation depends on tires that match the axle and the load. Each block of text on the sidewall has a defined meaning set by tire standards, not by the brand. 

Commercial [tire sidewall codes](/articles/tire-sidewall-symbols-dates-approval-markings-material-44526/) are grouped by function rather than read left to right. One group gives the size, one gives the load and speed, one covers construction details and one traces the tire back to its factory and date. Professional tire reading means finding the right group for the question you have, not memorizing the whole sidewall. 

Fleet tire markings repeat on every tire in a set, so a quick check of any single tire tells you the specification of the whole position. Matching markings across an axle keeps handling even and avoids mixing tires with different capacity. Record the markings when a tire enters service so later checks are fast. 

## Reading the tire size string 

The tire size string gives the physical dimensions of the tire in a single line of numbers and letters. A typical string such as 295/80R22.5 combines section width, aspect ratio, construction type and rim diameter. The width is in millimeters, the aspect ratio is a percentage of that width, R means radial and the last number is the rim size in inches. 

Section width tells you how wide the tire sits, which affects clearance and rim choice. Aspect ratio describes the sidewall height as a share of the width, so a lower number means a shorter sidewall. Commercial truck tires often use aspect ratios that balance load capacity with ride height. 

The rim diameter at the end of the string must match the wheel the tire is mounted on. A tire fitted to the wrong rim diameter cannot seat correctly and is unsafe to inflate. Check this number against the wheel before any mounting work begins. 

## Load index and load range explained 

The load index is a code number that maps to a maximum load the tire can carry at a stated inflation pressure. A higher load index means a tire built for more weight, and the figure assumes correct inflation and dual or single fitment as marked. Never substitute a tire with a lower load index than the vehicle requires. 

Load range is a letter code, such as F, G or H, that groups tires by their strength and inflation capability. Ply rating is a related older measure that describes the tire's carcass strength in terms of the number of cotton plies it would equal. Load range and ply rating appear together on many commercial tires and describe the same ruggedness in different systems. 

Load capacity only holds when the tire is inflated to the pressure the load table specifies for that fitment. Under-inflation reduces the load the tire can safely carry, even if the sidewall index is high enough. Use the vehicle's tire placard and the tire maker's load table together. 
| Marking | What it tells you | Depends on | 
| Load index | Maximum load the tire carries | Inflation pressure and single or dual fitment | 
| Load range letter | Carcass strength group | Tire construction and rated pressure | 
| Ply rating | Carcass strength in ply equivalents | Tire construction standard | 
| Speed rating letter | Maximum approved speed under load | Load and inflation as specified |  

## Understanding the speed rating 

The speed rating is a letter that states the maximum speed the tire is approved to run at when carrying its rated load. Speed rating appears in the service description next to the load index, for example 152/148L. A tire must never be run above the speed its rating allows, even for a short stretch. 

Speed rating and load capacity are linked, so running a tire at its top speed reduces the load it can safely carry. Commercial vehicles often use lower speed ratings than passenger cars because the duty cycle differs. Match the rating to the vehicle's operating speed rather than to its engine capability. 

A higher speed rating does not make a tire stronger for heavy loads. Treat the two figures as separate limits that both apply at the same time. If the vehicle's speed or load changes, check that both values still cover the duty. 

## The DOT code and the TIN 

The DOT code is a molded string that identifies the tire's manufacturing plant, its size code and the date it was produced. The TIN, or Tire Identification Number, is the full sequence that includes the DOT letters and the plant and date codes. The last four digits of the TIN give the week and year of manufacture. 

Professional tire reading treats the TIN as the tire's identity record. The plant code lets a fleet trace a batch if a problem appears, and the date code shows how long a tire sat in storage before service. Record the TIN for every tire you fit. 

The date code is four digits, with the first two as the week and the last two as the year. A tire made in an earlier year may still be serviceable, but its age matters for inspection and replacement planning. Age checks belong in every fleet tire marking audit. 

## Tread wear indicators and other marks 

Tread wear indicators are raised bars molded into the bottom of the main grooves at the minimum legal tread depth. When the tread surface reaches the height of these bars, the tire has worn to its limit and needs replacement. Inspect the indicators across the full tread width, not just at one point. 

Commercial truck tire sidewall also carries marks for maximum inflation pressure, the tire's construction and sometimes a retread indicator. The maximum pressure mark is a ceiling for the tire, not a target for normal operation. Set running pressure from the vehicle placard and load table instead. 

Sidewall markings can fade or be covered by dirt, so clean the area before reading. Photograph the markings when a tire is new and keep the image with the vehicle record. A clear photo settles later questions about size and date without guesswork. 

## Checking markings against the vehicle 

A tire is only correct for a vehicle when its markings match the axle's load and speed requirements. Compare the load index, speed rating and size on the tire with the vehicle's tire placard before fitting. A mismatch in any of these values makes the fitment unsuitable. 

Axle position changes the load a tire sees, so dual fitments and steer axles often need different specifications. Keep tires with the same markings paired on an axle to preserve even wear and handling. Mixing load ranges on one axle can overload the weaker tire. 

Mounting and inflation work on commercial wheels carries serious injury risk from high-pressure air. A trained tire technician should handle demounting, mounting and inflation in a safety cage. Drivers can read markings and check pressures, but heavy tire service belongs with a specialist. 

## Building a fleet tire marking record 

A marking record turns sidewall codes into a usable maintenance tool for a fleet. Log the TIN, size, load index, speed rating and fitment position for every tire in service. The record lets you spot mismatches and plan replacements before a tire reaches its limits. 

Fleet tire markings change when a tire is retreaded or moved to a new position, so update the record at each change. Tread wear indicator checks belong in the same routine as pressure checks. A written record also supports warranty claims and traceability. 

The record should name the inflation pressure used for each position and the load table it came from. Review the log at each service interval and flag any tire whose markings no longer match its duty. Clear records keep professional tire reading consistent across drivers and shifts. 

## Questions about commercial tire markings 

### What do the numbers on a commercial tire sidewall mean? 

The numbers on a commercial tire sidewall describe its size, load capacity, speed capability and date of manufacture. The size string gives width, aspect ratio and rim diameter, while the [load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) appear together in the service description. The last four digits of the DOT code give the week and year the tire was made. 

### How do I read a commercial tire sidewall code? 

Read a commercial tire sidewall code by grouping the markings by function. Find the size string first, then the service description with load index and speed rating, then the load range letter and the DOT code. Each group answers a separate question about the tire. 

### What is the difference between load range and ply rating? 

Load range and ply rating describe tire carcass strength in two different systems. Ply rating is an older measure expressed as the number of cotton plies the tire equals, while load range is a letter code that groups tires by strength and inflation capability. Both markings may appear on the same commercial tire. 

### What does the DOT code tell me about a commercial tire? 

The DOT code identifies the tire's manufacturing plant and the date it was produced. The full Tire Identification Number includes the plant code and ends with four digits for the week and year of manufacture. Fleets use the DOT code to trace batches and plan age-based replacement. 

### Where are the tread wear indicators on a truck tire? 

Tread wear indicators sit as raised bars at the bottom of the main grooves on a truck tire. When the tread surface wears down to the height of those bars, the tire has reached its minimum depth. Check the indicators across the full tread width during every inspection. 

### Can I fit a commercial tire with a different load index? 

A commercial tire with a lower load index than the vehicle requires should not be fitted. The load index must meet or exceed the axle's rated load at the specified inflation pressure. Matching load index, speed rating and size to the vehicle placard keeps the fitment correct.
