Classic Car Tire Markings: Reading the Sidewall
Learn how to read classic car tire sidewall markings, from legacy sizes and aspect ratios to bias-ply construction, date codes and rim diameter.
Contents
- Decoding the tie size designation
- What bias-ply markings reveal
- Aspect ratio and width on older tires
- Questions about classic tire sidewall markings
- What do classic car tire size markings mean?
- How do I find the date code on a classic tire sidewall?
- How can I tell if a tire is bias-ply from its markings?
- What is the rim diameter on a vintage tire size?
Classic car tire markings tell you the size, construction and age of a tire, and reading the sidewall is the quickest way to match a set to your wheel. The numbers look different from modern metric sizes because vintage tire size designations grew from older measuring systems. This page explains each marking on a classic car tire sidewall and what it means for fitment.
Decoding the tie size designation
A classic car tire size often appears as a width and a rim diameter, such as a number followed by a dash and the wheel size. Older letter codes like a letter prefix can also point to the load range or the original vehicle class. The vintage tire size designation avoids the aspect ratio that modern tires show, because older tires used a fixed tall profile. Compare the full sidewall figure against your wheel rim diameter before you assume a match.
What bias-ply markings reveal
Bias-ply construction means the cords run diagonally across the tire, and many classic sidewalls spell this out in words or in a ply count. A bias-ply tire markings set may list the number of plies and the material, which hints at strength rather than speed rating. These tires flex differently from radial tires, and the sidewall text often names the construction so you know what you have. Read the ply rating as a description of the tire body, not as a modern load index.
Aspect ratio and width on older tires
Tire width and aspect ratio describe how tall the sidewall sits relative to the tread width. On many classic tires the aspect ratio is implied by the old sizing system rather than printed as a separate figure. A sidewall that lists only width and rim diameter is telling you the profile is set by the tire family. Use those two figures with the rim diameter to estimate overall height and check clearance.
Questions about classic tire sidewall markings
What do classic car tire size markings mean?
Classic car tire size markings give the tire width and the wheel rim diameter in an older format, and sometimes a letter code for load range. They do not always show an aspect ratio, because vintage tires used a set tall profile. Read the width first, then match the rim diameter to your wheel. The full size designation tells you what the tire was built to fit.
How do I find the date code on a classic tire sidewall?
The date code sits in the DOT markings near the bead area and shows the week and year of manufacture. Older tires may carry a shorter code than modern ones, so the format depends on when the tire was made. Check the full DOT string, not just the last digits. A tire with an unreadable date code cannot be aged from the sidewall alone.
How can I tell if a tire is bias-ply from its markings?
Bias-ply tire markings often state the construction in words or list a ply count and material on the sidewall. A tire with no radial wording and a ply rating is likely bias-ply. The diagonal cord layout is the defining trait, and the sidewall text reflects it. Confirm the construction before you mix it with radials on the same axle.
What is the rim diameter on a vintage tire size?
The rim diameter is the wheel size the tire mounts on, and it appears at the end of the vintage tire size designation. It is measured across the wheel where the tire bead seats, not across the outer tire. Matching this figure to your wheel rim diameter keeps the tire seated correctly. A wrong rim diameter makes the tire unsafe to mount.