Choosing Used Tires for a Tire Size Change
How to read sidewall size markings and check used tires for a size change: section width, aspect ratio, rim diameter, tread depth and sidewall damage.
Contents
- Reading the sidewall size markings
- Comparing overall diameter
- Inspecting used tire condition
- Questions about used tire sizing
- What should I consider when buying used tires for a size change?
- How do I check that a used tire size matches my wheel?
- Can I fit a different size used tire on my car?
- Where can I get a used tire size check before purchase?
Choosing used tires for a tire size change means verifying that the secondhand tire matches the dimensions your wheel and vehicle need, and that its condition is sound. The sidewall numbers give section width, aspect ratio and rim diameter, which together set the overall diameter. A careful size check and a physical inspection of tread and sidewall keep a cost-saving purchase from becoming a fitment problem.
Reading the sidewall size markings
Sidewall size markings carry the three figures that define a tire's dimensions for a size comparison. The first number is section width in millimeters, the second is the aspect ratio as a percentage of that width, and the third is rim diameter in inches. A tire marked 205/55R16 therefore has a section width of 205 millimeters and fits a 16-inch wheel. Read all three figures before you compare a used tire with the size you are replacing.
Comparing overall diameter
Overall diameter is the figure that decides whether a differently sized used tire works on your vehicle. You calculate it from section width, aspect ratio and rim diameter, and two tires with different markings can still land close in overall diameter. A change in overall diameter alters speedometer readings and clearance around the wheel arch. Match overall diameter when the size change is meant to keep the vehicle behaving as before.
Inspecting used tire condition
Used tire condition carries as much weight as the size on the sidewall. Check tread depth across the full width of the tire, not just at one point, because uneven wear signals alignment or suspension trouble. Inspect the sidewall for cuts, bulges and cracking, and look for the date code that shows tire age. A trained tire technician should judge any damage you are unsure about before the tire goes on a wheel.
Questions about used tire sizing
What should I consider when buying used tires for a size change?
Buying used tires for a size change comes down to dimension matching and condition. Confirm the sidewall numbers give the section width, aspect ratio and rim diameter your wheel accepts, then compare overall diameter with your current size. Inspect tread depth and sidewall damage, and check tire age before you pay.
How do I check that a used tire size matches my wheel?
A used tire size check starts with the last number on the sidewall, which is the rim diameter the tire is built for. The tire must sit on a wheel of that exact diameter, so a 16-inch tire needs a 16-inch rim. Then compare section width and overall diameter against the size you are replacing.
Can I fit a different size used tire on my car?
A different size used tire can fit when its overall diameter stays close to the original and the wheel accepts its rim diameter. Section width also matters because a wider tire needs enough clearance around the suspension and body. Verify the dimensions against your vehicle before buying.
Where can I get a used tire size check before purchase?
A used tire shop can measure a secondhand tire and confirm its sidewall markings against your vehicle's requirements. Ask the staff to show you the sidewall numbers and the tread depth readings. For damage questions or a size change beyond a direct match, have a trained tire technician assess the fitment.