Choosing Tires by Size and Load Rating

Learn how to match a tire's size and load rating to your vehicle, read the sidewall markings and door placard, and pick a replacement that carries the load.

7 min read5 viewsChoosing Tires by Size and Load Rating
— · 0 votes
Contents
  1. Start with the vehicle door placard
  2. Read the tire size on the sidewall
  3. What the load index number means
  4. Load range and sidewall load rating
  5. How to choose the right load rating
  6. Match the size before the rating
  7. Check the wheel and inflation too
  8. Questions about tire size and load rating
  9. How do I choose a tire load rating?
  10. What is the best load rating for tires?
  11. What does choosing tires by size and load involve?
  12. Can I fit a tire with a higher load index?
  13. Where is the load rating on a tire sidewall?

Choosing tires by size and load rating means matching two numbers on the sidewall to the vehicle's own specifications. The size must fit the wheel and the wheel well, and the load rating must meet or exceed the load the vehicle is designed to carry. Start with the vehicle door placard, then confirm the tire carries the same size and an adequate load index.

  • Read the vehicle door placard first, since it lists the size and load rating the vehicle was built for.
  • Match the tire size exactly unless a trained specialist confirms an alternative fitment.
  • Never fit a tire with a lower load index or load range than the placard requires.
  • A higher load rating is acceptable when the size, speed rating and inflation guidance still suit the vehicle.
  • Check that the wheel itself is rated for the load the tire will carry.

Start with the vehicle door placard

The vehicle door placard is the manufacturer's own statement of the tire size and load rating the vehicle needs. It sits on the driver's door jamb and lists the original tire size, the recommended inflation pressure and the load conditions for the vehicle.

The placard also states the vehicle load capacity, which is the total weight of passengers and cargo the vehicle may carry. That figure sets the floor for the tire load rating, because the tires together must support the loaded vehicle.

Use the placard as the reference for any replacement tire selection. A tire shop can read the same placard, but the numbers on it come from the vehicle builder rather than from the tire seller.

Read the tire size on the sidewall

The tire size appears as a string of numbers and letters on the sidewall, and each part describes a geometric dimension. A size such as 225/45R17 gives the section width, the aspect ratio, the construction and the wheel diameter.

The first number is the section width in millimeters, measured across the widest part of the tire. The second number is the aspect ratio, the sidewall height as a percentage of the section width, and the letter R marks radial construction.

The final number is the wheel diameter in inches, so the tire must sit on a wheel of that size. A tire of a different width or aspect ratio can change the overall diameter and affect speedometer readings and clearance.

What the load index number means

The load index is a code number on the sidewall that maps to a load capacity in pounds or kilograms for a single tire. A higher load index corresponds to a greater load capacity at the stated inflation pressure.

The load index appears near the size, often after the speed symbol, such as 94H. The number 94 is the load index, and the letter H is the speed rating, so read the pair together when choosing a replacement.

Load capacity is quoted per tire, so the vehicle's total capacity is shared across all four tires. The load index on each tire must therefore be at least as high as the placard calls for, never lower.

Load range and sidewall load rating

Load range is a letter code, such as Load Range C, D or E, used on light truck and specialty tires. It groups tires by their construction strength and the inflation pressure they are built to handle.

The sidewall load rating combines the load index and, where present, the load range into one statement of what the tire can carry. A higher load range tire has a stiffer carcass and can hold more pressure for heavier loads.

Load range and load index describe the same underlying capacity in different ways, so check both when comparing tires. A tire with an adequate load index but a lower load range may not suit a vehicle that needs the higher inflation pressure.

MarkingWhat it statesWhere to check it
Load indexLoad capacity of one tireSidewall, next to the size
Load rangeConstruction strength and pressure capabilitySidewall, on light truck tires
Tire sizeWidth, aspect ratio and wheel diameterSidewall and door placard
Placard figureSize and load the vehicle requiresDriver's door jamb

How to choose the right load rating

Choose the load rating from the placard, then confirm the replacement tire meets or beats it. A tire with a load index equal to the original satisfies the vehicle's stated requirement without changing the ride.

A higher load index adds capacity but can bring a firmer ride and a heavier tire. Fitting a lower load index reduces the safety margin, so it should not be done to save weight or cost.

When a vehicle is used to carry loads near its limit, a trained tire technician can confirm whether the original rating still covers the duty. The placard remains the starting point for that conversation.

Match the size before the rating

The tire size must fit the wheel and the wheel well before the load rating matters at all. Fitting a size that differs from the placard changes the overall diameter and may cause rubbing or inaccurate speed readings.

Replacement tire selection usually keeps the original size, since the vehicle was engineered around it. A different size needs a fitment check by a specialist who can verify clearance, wheel width and load together.

Wheel width has its own range for each tire size, and a tire mounted on a wheel outside that range sits poorly. Confirm the wheel is rated for the load the tire will carry as well.

Check the wheel and inflation too

A tire carries its rated load only at the inflation pressure its load table specifies. Underinflation lowers the real capacity, so the pressure on the placard must be maintained for the load rating to hold.

The wheel has a load rating of its own, and a light wheel on a heavy vehicle can become the weak point. Match the wheel rating to the tire rating so neither part is overloaded.

A trained specialist should mount, balance and torque the wheels, since an incorrectly fitted wheel can come loose. Tire fitting is a job for a shop with the right equipment rather than a roadside task.

Questions about tire size and load rating

How do I choose a tire load rating?

Choose the tire load rating from the vehicle door placard and match or exceed it with the replacement. The placard lists the load the vehicle was built to carry, so any tire with a lower load index falls short. A tire technician can confirm the match when you buy.

What is the best load rating for tires?

There is no single load rating that suits every vehicle, because the right figure comes from the door placard. The rating must meet the vehicle's load capacity at the stated inflation pressure. A higher index adds capacity, while a lower one removes safety margin.

What does choosing tires by size and load involve?

Choosing tires by size and load involves reading the sidewall markings and comparing them to the placard. The size covers width, aspect ratio and wheel diameter, and the load index covers capacity. Both must suit the vehicle before the tire is fitted.

Can I fit a tire with a higher load index?

Yes, a tire with a higher load index can be fitted when its size and speed rating still suit the vehicle. The extra capacity can firm up the ride because the sidewall is stiffer. Confirm the wheel rating and inflation guidance with a technician first.

Where is the load rating on a tire sidewall?

The load index sits on the sidewall near the tire size, just before the speed symbol. A marking such as 94H means a load index of 94 and a speed rating of H. Light truck tires also show a load range letter.

Latest articles