# Choosing a Tire Size for a Given Rim Width

Learn how to match tire size to rim width: read the approved rim width range, convert section width, and judge when a narrower tire still fits safely.

Choosing a tire size for a given rim width starts with one rule: the tire's approved [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) must contain your wheel's width. Tire makers publish that range for every size, and it sits beside the section width and rim diameter on the sidewall. Read those numbers first, then compare them with the measured width of your rim before you buy. 

## Read the approved rim width range 

The approved rim width range is the span of wheel widths a tire maker lists for a given tire size. That range comes from the ETRTO measuring rim width, the reference width used to define the tire's nominal section width. A tire mounted on a rim inside its range sits close to its designed shape and tread profile. Mounting outside the range changes how the sidewall flexes and how the tread contacts the road. 

## Convert section width to inches 

[Tire section width](/articles/tire-width-chart/) is given in millimeters on the sidewall, while rim width is given in inches. Dividing the metric section width by 25.4 gives an approximate inch figure for comparison. A 225 mm tire, for example, is roughly 8.9 inches wide at its widest point. Section width and rim width are not the same measurement, so allow for the sidewall bulge. 

## Judge a narrower tire on a wide rim 

A narrower tire can be mounted on a rim only when the rim width stays inside that tire's approved range. Push the tire too narrow for the rim and the sidewalls pull inward, which exposes the rim edge and reduces ride comfort. Check the range for the specific size rather than relying on a general chart. A trained tire technician should confirm any fitment near the edge of the range. 

## Tire Size and Rim Width Questions 

### What size tire fits a 7.5 inch rim? 

No single tire size fits a 7.5 inch rim, because several widths list that rim inside their approved range. Tire makers publish the approved rim width range for each size, and a 7.5 inch wheel often falls within the range of more than one section width. Compare the range for the exact size you plan to buy, and confirm the rim diameter matches the tire's required diameter. 

### What width tire fits on what width rims? 

Tire width and rim width are linked by the approved rim width range printed for each tire size. A [tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) by rim width gives a starting point, but the tire maker's own range is the figure that decides fitment. Rim diameter must also match the tire's nominal diameter, such as a tire built for a given wheel diameter. 

### Can I put a narrower tire on my rim? 

You can put a narrower tire on a rim only if the rim width stays within the narrower tire's approved rim width range. Going below that range pulls the sidewalls in and leaves the rim edge more exposed to curb damage. Check the specific size's range, and have a tire technician inspect the fitment if the rim sits at the limit. 

### How do I calculate tire size for my rims? 

Calculating tire size for a rim means converting the tire's metric section width to inches and comparing it with the wheel width. Divide the section width in millimeters by 25.4, then check that your rim width falls inside the approved range for that size. The calculation gives an estimate, and the published range confirms the actual fit.
