# Caravan Tire and Wheel Dimensions

Read the sidewall markings on caravan tires, understand wheel diameter, rim diameter, width, aspect ratio, load index and bolt pattern, and check fitment.

Caravan tire dimensions are printed on the tire sidewall as a size code, and caravan [wheel dimensions](/articles/wheel-measurements-explained-diameter-width-offset-and-more/) come from the rim the tire sits on. Reading both together tells you the [tire width, aspect ratio, rim diameter](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/), load index and the bolt pattern the wheel uses. The two sets of numbers must match before a tire goes on a wheel or a wheel goes on the trailer. 

- A tire size code gives width, aspect ratio and rim diameter in one line on the sidewall.
- The rim diameter in the tire code must equal the wheel diameter the tire mounts on.
- The load index is a separate number and matters more than width on a loaded caravan.
- Bolt pattern and center bore belong to the wheel, not the tire, so read them from the hub face.
- Measure a wheel with the tire off if you need true diameter and width rather than a code.
 

## Where caravan tire dimensions are printed 

Caravan tire dimensions live on the sidewall of the tire in a molded size code. The code reads as a width, then an aspect ratio, then the rim diameter, laid out in a standard sequence. Tire makers mold the same code on both sides of the tire, so you can read it without removing anything. 

A typical code looks like 195/70 R 14, and each group carries one fact. The first number is the tire width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, which is the sidewall height as a percentage of that width. The number after the letter is the rim diameter in inches. 

The letter R describes how the tire was built, and it is not a radius. [Load index and speed rating](/articles/tire-load-index-load-range-speed-ratings-material-44528/) sit after the size, often separated by a space or a letter. Write the whole line down exactly, because a single wrong digit points you at the wrong tire. Photograph the sidewall as a backup before you order anything. 

## What the width and aspect ratio tell you 

[Tire width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) set the height of the tire, so they change how much room the caravan has around the wheel. A wider tire needs more clearance to the frame and the fender than a narrow one of the same diameter. Width is given in millimeters and is the number printed before the slash. 

Aspect ratio is the sidewall height written as a percentage of the width, not a fixed measurement. On a 195/70 tire the sidewall is seventy percent of the width, so the tire stands taller than a 195/65 of the same rim size. Two tires with different aspect ratios can share a width and still have different overall diameters. 

[Overall tire diameter](/articles/tire-diameter-chart-in-inches/) is not printed on the sidewall and has to be worked out. Add the rim diameter in millimeters to twice the sidewall height, and you have the approximate overall diameter. Trailer makers design clearance around that figure, so keep it close when you replace a tire. 

## Caravan wheel diameter and rim diameter 

Caravan wheel diameter is the measurement across the rim where the tire bead seats, and it must match the rim diameter in the tire code. A 14 in the tire size means the tire fits a fourteen-inch wheel and nothing else. Putting a tire on a wheel of another diameter is a job for a tire shop with the right machine. 

Rim width is a separate figure from rim diameter, and it is usually stamped on the wheel. Tire makers publish a range of rim widths for each tire size, and a wheel inside that range holds the bead correctly. A rim that is too narrow or too wide distorts the tire and changes how it carries load. 

Wheel diameter measured on the outside of a bare rim differs from the advertised diameter because the flanges add height. For that reason, read the stamped size on the wheel rather than guessing from a tape measure. If the stamp is unreadable, take the wheel to a specialist who can measure the bead seat. 

## Load index and why size alone is not enough 

The load index on a caravan tire states the maximum load one tire can carry, and it appears as a number after the size code. Two tires with the same dimensions can carry very different loads, so a matching size is only half the check. A loaded caravan puts a steady load on each tire that does not drop the way a car's does. 

Match the load index of a replacement tire to the figure the caravan maker specifies for that axle. A lower index than the original leaves less capacity than the trailer was built for. The load index is a code, not a weight in kilograms, and a tire shop or the tire maker's chart converts it. 

Check the tire pressure the caravan maker lists for the load, and remember that pressure and load index work together. Underinflation raises the heat a tire builds up on a tow, even when the load index looks right. Inflation figures belong to the trailer, not to the tire sidewall alone. 

## Bolt pattern and center bore on the wheel 

Bolt pattern describes how many studs or bolts a wheel uses and the circle they sit on, and it belongs to the wheel. A five-stud wheel with a given spacing will not fit a hub drilled for another count or spacing. Bolt pattern is written as a stud count plus the diameter of the circle through the stud centers. 

Center bore is the hole in the middle of the wheel that centers it on the hub. A wheel with a larger bore needs a centering ring to sit true, while a smaller bore will not go on at all. Wheel offset is a third wheel figure, and it sets how far the rim sits in or out from the hub face. 

Read bolt pattern and center bore from the hub or the wheel stamp, not from the tire. Tires and wheels are sold separately, and a shop that sells both can confirm the pairing. Do not force a wheel onto studs that do not line up cleanly. 

## How to measure a wheel with the tire off 

Measuring a wheel with the tire removed gives the true rim width and bead seat diameter. A tire shop removes the tire and measures the bead seat across the rim with a caliper or a rim gauge. Do this when the stamp is worn, or when you need to confirm a size before buying a matched set. 

Measure rim width between the inner faces of the flanges, where the tire bead sits. Measure bead seat diameter across the rim at the seat, not across the outer flange edges. Count the stud holes and measure the stud circle for the bolt pattern at the same time. 

A wheel with a bent flange or a worn bead seat will not hold a tire correctly, so check the rim for damage while it is bare. Replace a wheel that shows cracks or heavy corrosion rather than trying to correct it. Wheel repair belongs to a trained specialist, not a roadside job. 

## Matching a new tire to the existing wheel 

A new caravan tire must match the existing wheel on three counts: rim diameter, [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) and load index. The tire size code confirms the rim diameter, and the tire maker's rim width range confirms the width. The load index confirms the capacity, and all three checks pass or fail on their own. 

The table below shows which figure comes from which part, so you know where to look. Keep the original tire size and load index unless the caravan maker approves a change. A change in size can alter clearance and the load each tire carries. 

Have a tire shop mount and balance the tire on the wheel, and check the wheel torque after fitting. Carry the original sidewall details with you when you buy, and compare the new tire against them on the spot. A mismatch caught at the counter is cheaper than one caught on the road. 
| Figure | Found on | What it tells you | 
| Tire width | Tire sidewall | Tread and section width in millimeters | 
| Aspect ratio | Tire sidewall | Sidewall height as a percentage of width | 
| Rim diameter | Tire sidewall | Wheel diameter the tire fits in inches | 
| Load index | Tire sidewall | Maximum load the tire can carry | 
| Bolt pattern | Wheel or hub | Stud count and stud circle diameter |  

## When a dimension change needs approval 

Changing a tire size or wheel dimension on a caravan can affect clearance, load capacity and how the trailer tows. The trailer maker's specification is the reference for the axle, the brakes and the body clearance. A change that moves outside that specification needs the maker's approval or a qualified engineer's sign-off. 

Fitting a larger wheel may lift the tire into the fender or bring it against a brake drum. A wider tire may touch the frame on full articulation or contact the wheel arch. These are clearance checks best done with the caravan loaded, at a shop with a lift. 

Load index and tire pressure must be revisited whenever the tire changes, because the axle load is fixed by the trailer. Ask a tire specialist to confirm the pairing of tire, wheel and axle before any change goes on the road. Modifications to brakes or suspension belong to a trained technician. 

## Caravan Tire and Wheel Size Questions 

### How do I find my caravan tire dimensions? 

Caravan tire dimensions are printed on the tire sidewall as a size code such as 195/70 R 14. Read the width, aspect ratio and rim diameter in order, then note the load index that follows. A photo of the sidewall keeps the details handy for comparison. 

### What size are caravan wheels? 

Caravan wheel size follows the rim diameter printed in the tire code, so a tire marked 14 fits a fourteen-inch wheel. Rim width and bolt pattern are stamped on the wheel itself and vary between trailers. Read both the tire sidewall and the wheel stamp before ordering a replacement. 

### Does the rim diameter in the tire code have to match the wheel? 

Yes, the rim diameter in the tire size must equal the wheel diameter the tire mounts on. A tire cannot be fitted to a wheel of another diameter and hold its bead. Have a tire shop mount the tire, since seating a bead by hand can injure a person. 

### Can I change the tire size on my caravan? 

A tire size change on a caravan affects clearance, load index and how the trailer tows. The trailer maker's specification sets the safe range, and a change outside it needs approval. Have a specialist check clearance and the axle load before the new size goes on the road. 

### What is the load index on a caravan tire? 

The load index is a code on the tire sidewall that states the maximum load one tire can carry. A loaded caravan keeps a steady load on each tire, so match the index to the trailer maker's figure. Two tires of the same size can carry different loads. 

### What does the bolt pattern tell me about a caravan wheel? 

Bolt pattern gives the number of studs and the diameter of the circle through them, and it belongs to the wheel and hub. A wheel with the wrong bolt pattern will not sit on the hub safely. Check the pattern and the center bore together when you compare wheels.
