# Car Tire Size Chart in Inches

Learn how to read a car tire size chart in inches, convert sidewall numbers to section width and overall diameter, and match a tire to your vehicle.

A car [tire size chart in inches](/articles/tire-size-calculator-diameter-comparison-material-44527/) converts the sidewall code into measurable dimensions. The code gives section width in millimeters, aspect ratio, and rim diameter in inches, and the chart turns those numbers into an overall diameter in inches. You can then compare tire sizes and check fitment without guessing. 

- The sidewall code holds three numbers: section width in millimeters, aspect ratio, and rim diameter in inches.
- Overall diameter in inches comes from rim diameter plus two sidewall heights.
- Aspect ratio is a percentage of section width, not a fixed measurement.
- Inch size conversion lets you compare metric passenger car tires with inch-based sizes.
- Match overall diameter and section width to the vehicle before buying any tire.
 

## What the sidewall numbers mean 

The sidewall tire size numbers follow a passenger car [tire size format](/articles/tire-size-markings-width-aspect-ratio-construction-rim-size-material-44540/) such as 225/45R17. The first number is section width in millimeters, measured across the widest part of the inflated tire. The second number is the aspect ratio, and the letter shows the internal construction. 

The final number is rim diameter in inches, which tells you the wheel the tire mounts on. A 225/45R17 tire has a 225 mm section width, a 45 aspect ratio, and fits a 17 inch rim. [Tire size chart](/articles/commercial-truck-and-bus-tire-sizes-common-sizes-and-their-dimensions/) reading starts with splitting the code into those three parts. 

Some tires carry a letter before the width, such as P for passenger car. Light truck tires may use LT, and these prefixes change the load range but not the meaning of the numbers. Check the full code on the sidewall rather than a partial one. 

## How aspect ratio builds sidewall height 

Aspect ratio is the sidewall height expressed as a percentage of section width. A 45 aspect ratio on a 225 mm width gives a sidewall height of about 101 mm. The sidewall numbers on the tire therefore work together rather than standing alone. 

This relationship means a wider tire with the same aspect ratio has a taller sidewall. A narrower tire with a higher aspect ratio can reach a similar overall height. [Section width and aspect ratio](/articles/comparing-tire-width-and-aspect-ratio/) together decide how tall the tire stands. 

Reading the ratio as a percentage avoids a frequent mistake. The 45 in 225/45R17 is not 45 mm of sidewall. Convert the calculated sidewall height to inches by dividing millimeters by 25.4. 

## Converting to overall diameter in inches 

Overall diameter in inches equals the rim diameter plus twice the sidewall height in inches. Sidewall height comes from section width multiplied by the aspect ratio, then divided by 25.4. This inch conversion turns the metric sidewall numbers into a single figure you can compare. 

For a 225/45R17 tire, the sidewall height is about 101 mm, or about 4 inches. Twice that sidewall plus the 17 inch rim gives an overall diameter of roughly 25 inches. The exact figure depends on the tire model and its measured dimensions. 

Rounded chart values are close enough to compare sizes, but the tire maker's published specifications are the authority. Overall diameter affects speedometer reading, clearance, and gearing. Keep a replacement close to the original diameter when the vehicle electronics depend on it. 

## Inch tire sizes versus metric sizes 

Inch tire sizes appear on some light truck and older vehicle tires, written as figures such as 31x10.50R15. The first number is overall diameter in inches, the second is section width in inches, and the last is rim diameter. Chart reading works the same way once you know which figure is which. 

Metric and inch sizes describe the same three dimensions in different units. Convert an inch size to millimeters by multiplying by 25.4, or convert a metric width to inches by dividing by 25.4. An inch size conversion lets you line up both formats in one comparison. 

The two formats do not always match exactly, because inch sizes are often nominal. A tire marked 31 inches tall may measure slightly more or less. Use measured specifications when the difference matters for clearance or gearing. 

## Using a tire size chart by vehicle 

A [tire size chart by vehicle](/articles/find-tyre-size-by-reg-material-45371/) in inches lists the original sizes for a model and trim. The chart shows the section width, aspect ratio, rim diameter, and overall diameter together. Start with the size printed on the vehicle door jamb or in the owner's manual, then find it on the chart. 

Trims and engine options can change the original tire size on the same model. A chart that groups sizes by vehicle therefore needs the exact trim and year to be useful. Confirm the size on the vehicle placard rather than relying on a general list. 

Use the chart to compare optional sizes the maker lists for that vehicle. Fitting a size outside those options changes clearance and speedometer accuracy. A trained tire technician can confirm whether an alternative size fits the wheel and body. 

## Universal tire sizes and where they fit 

A universal tire size is a nominal size that several vehicles can use, not a size that fits every car. Universal car tire sizes still carry a width, aspect ratio, and rim diameter. Fitment depends on the wheel width, the wheel well, and the brake clearance of each vehicle. 

Two cars may share a universal tire size on paper and still differ in clearance. Suspension height, fender shape, and wheel offset decide whether a tire rubs. Treat a universal size as a starting point for comparison, not as approval for a specific car. 

The wheel must also accept the tire's section width. A tire that is too wide for the rim seats poorly and wears unevenly. Check the [rim width range](/articles/approved-rim-widths-by-tire-size-checking-tire-and-rim-compatibility/) the tire maker publishes for that size before mounting. 

## Steps to compare two tire sizes 

Comparing two tire sizes means converting both to section width, sidewall height, and overall diameter in the same units. Write each code down and calculate the dimensions before you judge the difference. The comparison shows whether the new tire stays close to the original. 

A small change in aspect ratio can offset a change in width. Choosing a narrower tire with a higher ratio can keep the overall diameter close. The reverse choice can raise the diameter and alter the speedometer reading. 

Check rim diameter last, because a different rim needs a matching wheel. A tire cannot mount on a rim of another diameter, whatever the chart says about width. Have a technician verify the final combination on the vehicle. 

- Write down both sidewall codes in full.
- Multiply section width by the aspect ratio to get sidewall height in millimeters.
- Divide by 25.4 to convert sidewall height to inches.
- Double the sidewall height and add the rim diameter.
- Compare the two overall diameters and note the difference.
- Confirm the wheel width range accepts the new section width.
 

## Mistakes when reading a tire chart 

A frequent chart reading error is treating the aspect ratio as a measurement in millimeters. The ratio is a percentage, so it changes with section width. Mixing the two produces a sidewall height that is far from the real figure. 

Another error is reading rim diameter as overall diameter. Rim diameter covers only the wheel, not the rubber around it. Overall diameter in inches always includes two sidewalls plus the rim. 

Charts also list nominal sizes that differ slightly from measured tires. Compare published specifications from the tire maker when precision matters. Ask a trained specialist before changing a size that affects clearance or vehicle electronics. 

## Car Tire Size Chart Questions 

### How do I read a car tire size chart? 

Read a car tire size chart by splitting the sidewall code into section width, aspect ratio, and rim diameter. Multiply width by the ratio to get sidewall height, then add two sidewalls to the rim diameter for overall diameter in inches. The chart lists those converted figures so you can compare sizes. 

### What is a car tire size chart in inches used for? 

A car tire size chart in inches converts the metric sidewall code into overall diameter and sidewall height in inches. The inch figures let you compare tire sizes and check clearance more easily. They also help line up inch-based and metric tire formats. 

### How do I find the tire size chart by vehicle in inches? 

Find the original size on the vehicle door jamb placard or in the owner's manual first. Then look up that size on a chart that lists the trim and year, because sizes differ between versions of the same model. A tire technician can confirm the listed size for your vehicle. 

### What is a universal car tire size? 

A universal car tire size is a nominal size shared by more than one vehicle, not one that fits every car. Fitment still depends on wheel width, clearance, and offset for each model. Confirm the size against your vehicle before mounting. 

### How does inch size conversion work for tires? 

Inch size conversion multiplies or divides by 25.4 to switch between millimeters and inches. A 10.50 inch section width equals about 267 mm, for example. Convert each dimension separately, then rebuild the overall diameter. 

### Does a different tire size change my speedometer? 

A different overall diameter changes the speedometer reading because the wheel turns at a different rate for the same road speed. Keep the new diameter close to the original to limit the error. A technician can check the change and any electronic recalibration the vehicle needs.
