# Baby Trend Double Stroller Tire Size

Learn how to read the tire size on a Baby Trend double stroller, measure a wheel when the marking is gone, and match replacement tires and tubes correctly.

A Baby Trend double stroller does not use one tire size across every model, so the size is read from the marking on the tire sidewall or from the wheel itself. A double jogging stroller from this brand carries pneumatic tires in sizes such as 12 inch, 16 inch and 20 inch depending on the model and axle position. Match the number on the sidewall, or the measured diameter and width, before you buy a replacement. 

- Check the sidewall marking before buying, since Baby Trend double stroller models use different tire sizes.
- Measure the outside tire diameter and the tire width when the sidewall numbers are worn away.
- Replace a tire with the same size and the same axle bore so it fits the existing wheel.
- Front and rear wheels on a double jogging stroller can differ in size and in hub design.
- A tire that is too loose or too tight on the rim is a fitment problem, not a size to force.
 

## Where the tire size is marked 

The tire size of a Baby Trend double stroller is printed or molded on the sidewall of each tire. Look for a string of numbers such as 12 x 2.125 or 16 x 1.75, where the first number is the tire diameter and the second is the tire width in inches. The marking sits near the bead, the edge where the tire meets the rim, so you may need to wipe off dirt to read it. 

Reading the sidewall takes a minute per wheel and saves a return later. The marking can face inward on a mounted wheel, so turn the wheel or deflate it slightly to bring the numbers into view. A worn or faded sidewall may show only part of the string, and the remaining digits are still useful as a starting point. 

Write the full string down for each wheel before you shop. A double stroller has two rear positions and one or two front positions, and those wheels do not always share a size. Keeping a note per wheel prevents ordering the same tire for a front fork that needs a different one. 

## Tire diameter and width explained 

Tire diameter is the height of the inflated tire measured across the wheel from outside edge to outside edge. Width is the distance across the tread from sidewall to sidewall, measured on the inflated tire. The marking gives both numbers in inches, and the order is diameter first, then width. 

[Wheel dimensions](/articles/wheel-measurements-explained-diameter-width-offset-and-more/) on a stroller include more than the tire, because the rim and hub sit inside it. The rim diameter must match the tire bead diameter, or the tire will not seat. The hub width and axle bore decide whether the wheel fits the stroller frame, and those are separate from the tire size. 

A wider tire adds cushioning on rough ground and a narrower tire rolls more easily on pavement. Matching the original width keeps the tire clear of the frame and the fender. Changing width changes the outside diameter less than changing diameter does, but both affect how the stroller handles. 

## Measuring a wheel with no visible marking 

Measuring the wheel answers the size question when the Baby Trend double stroller tire marking is gone. Inflate the tire to its normal pressure first, because a flat tire measures smaller than a full one. Use a tape measure or a ruler held straight across the wheel. 

Measure the outside diameter from the top of the tread to the bottom of the tread through the center. Measure the width across the tread at its widest point. Then measure the axle bore, which is the hole through the hub, and the hub width where the frame clamps the wheel. 

Compare your measurements with the sidewall string of the other wheels on the same stroller when those are still readable. Round to the nearest marked size rather than inventing a fraction, since tires are sold in standard steps. A measurement that falls between two sizes means the rim should be checked before you order. 

## Front and rear wheels can differ 

A double jogging stroller often runs a larger rear wheel and a smaller front wheel, so the Baby Trend double [stroller tire size](/articles/how-to-read-stroller-and-jogging-buggy-tire-sizes-and-match-replacement-dimensions/) is not one number for the whole stroller. The rear pair carries the child weight and rolls over obstacles, while the front wheel steers. Each position therefore has its own tire and often its own tube. 

The front wheel on a swivel fork also has a different hub and axle arrangement from the fixed rear wheels. A tire that matches in diameter can still fail to fit if the rim width or the hub does not match. Check the wheel, not only the tire, when you compare positions. 

Label each wheel position when you remove tires for replacement. Rebuilding with a rear tire on the front fork, or the reverse, creates a fitment problem that looks like a wrong size. Keep the removed tire next to the wheel it came from until the new one is mounted. 

## Matching replacement tires and tubes 

A replacement tire for a Baby Trend double stroller must match the sidewall size and the rim diameter of the wheel it goes on. The same size string on a tire from another maker can sit differently on the rim, so check the bead seat after mounting. Inflate slowly and watch that the bead sits evenly around the rim. 

Tubes are sized to the tire, not to the stroller, and a tube range such as 12 x 1.75 to 2.125 covers several widths. Choose a tube whose range includes your tire size and whose valve matches the rim hole. A tube that is too large bunches inside the tire, and one that is too small stretches thin. 

Inspect the rim strip, the band that covers the spoke ends, before fitting a new tube. A sharp spoke end or a torn strip punctures the new tube at once. Where the rim is bent or cracked, a trained bike or stroller technician should assess the wheel before any new tire goes on. 

## Steps to confirm the right size 

Confirming the size takes a short sequence that starts at the tire and ends at the frame. Work through it once per wheel, and the order of the checks keeps you from buying a tire that fits the rim but not the stroller. Do the checks with the wheel off the stroller where that is possible. 

The sidewall string is the first check and the measurement is the backup. The rim diameter and the hub then decide whether the wheel mounts. Tire pressure is the last check, because the marked pressure range on the sidewall sets how the tire should be inflated. 

Keep the old tire until the new one is mounted and inflated. Compare the two side by side for diameter, width and bead shape. A visible difference in any of those means the order should be checked again before use. 

- Read the full size string on the sidewall of the old tire.
- Inflate the tire and measure the outside diameter and width.
- Measure the rim diameter where the tire bead seats.
- Measure the axle bore and the hub width at the frame clamp.
- Compare the new tire with the old one before mounting.
- Inflate slowly and check that the bead sits evenly.
 

## Fitment problems to watch for 

A tire that will not seat evenly on the rim points to a size or rim mismatch rather than a mounting technique. The bead must sit in the rim seat all the way around, and a high spot or a bulge means it has not. Stop inflating and release the air if the bead will not settle. 

Frame clearance is the second fitment check on a Baby Trend double stroller. A wider tire can rub the frame, the brake arm or the fender even when the diameter is right. Turn the wheel by hand after mounting and look for contact at every point of rotation. 

A wheel that wobbles on the axle suggests a hub or bearing problem, not a tire problem. Bearings and axles on a stroller wheel carry load and should be serviced by a trained technician when they are loose or rough. Riding on a damaged hub can damage the frame. 

## When to replace a tire or a wheel 

A tire on a Baby Trend double stroller needs replacement when the tread is worn through, the sidewall is cut, or the bead no longer holds. A tire that loses pressure repeatedly after the tube is checked may have a damaged casing. Replace the tire rather than patch a sidewall. 

A wheel needs replacement or professional repair when the rim is bent, the hub is cracked, or the axle thread is damaged. These are structural parts, and a repaired rim that fails under load can injure a child. Have a trained technician inspect any wheel with visible damage. 

Keep spare tubes of the correct size and a pump with a pressure gauge for the stroller. Correct pressure protects the tire and keeps the ride stable. The pressure range is printed on the sidewall of each tire, and it differs between tire sizes. 

## Baby Trend stroller tire questions 

### What size tires does a Baby Trend double jogging stroller use? 

A Baby Trend double jogging stroller uses pneumatic tires whose size depends on the model and the wheel position. Sizes such as 12 inch, 16 inch and 20 inch appear across the range, with the rear and front wheels sometimes differing. Read the sidewall marking on your own stroller to get the exact size. 

### How do I find the tire size on a Baby Trend double stroller? 

The tire size is molded or printed on the tire sidewall as a string of two numbers, diameter first and width second. Wipe the sidewall clean and turn the wheel until the marking faces you. If the marking is worn away, measure the inflated outside diameter and the width instead. 

### Can I fit a different size tire to my stroller wheel? 

A different size tire fits only when the bead diameter matches the rim and the width clears the frame. A larger diameter changes the stroller geometry and can rub the frame or the brake. Keep the original size unless a trained technician confirms the change. 

### Do front and rear tires on a double stroller match? 

Front and rear tires on a double stroller do not always match, because the rear wheels carry load and the front wheel steers. Check the sidewall of each tire separately and note the size per position. The hub and axle also differ between the front fork and the rear axle. 

### How do I measure a stroller wheel with no tire marking? 

Inflate the tire, then measure the outside diameter across the tread and the width at the widest point. Measure the axle bore and the hub width as well, since those decide whether the wheel mounts. Round the diameter to the nearest standard tire size.
