# Audi Winter Wheels and Tire Packages: Fitment by Model

How Audi winter wheel and tire packages fit by model: bolt pattern, offset, center bore, tire size markings, TPMS sensors and lug nut torque all checked first.

Audi winter wheels and tire packages fit a model only when the wheel geometry and the tire size both match that car, so the bolt pattern, offset and center bore decide whether a set goes on. A second wheel set for winter lets you keep a dedicated tire for cold weather and swap the whole wheel at home. This page explains how those numbers work on an Audi and what to confirm before you buy a package. 

## Bolt pattern and center bore on an Audi 

Audi wheels use a five-bolt pattern measured as 5x112 on the models that take this fitment, and the center bore is 57.1 mm on those hubs. The bolt pattern tells you how many lug bolts sit around the hub and how far apart they are. The center bore is the hole in the middle of the wheel that must sit on the hub lip. A wheel with a larger bore needs a centering ring, while a smaller bore will not seat at all. 

## Offset changes how the wheel sits 

Audi wheel offset, marked ET on the wheel, is the distance from the mounting face to the wheel centerline. A winter package keeps the offset close to the factory value so the tire stays inside the body and clears the brakes and suspension. Moving the offset too far outward or inward changes steering feel and can cause rubbing. Check the offset stamped on your current wheel before you compare a winter set. 

## Reading the tire size and TPMS 

Audi tire size markings give the width, the aspect ratio, the radial construction and the rim diameter, and the winter tire must match the wheel you fit. A narrower winter tire with the same overall diameter is a valid choice for snow, as long as the load and speed ratings suit the car. Audi TPMS sensors report pressure from inside each wheel, so a second set needs sensors matched to the car or a transfer from the old wheels. Confirm the sensor type your model uses before ordering. 

## Audi winter wheel fitment questions 

### What bolt pattern do Audi winter wheels need? 

Audi winter wheels need the bolt pattern of the specific model, and many Audi cars use 5x112, which means five lug bolts on a 112 mm circle. The pattern must match the hub exactly, because a wheel drilled for a different circle will not seat on the bolts. Check the pattern for your model in the owner's manual or on the wheel you remove. 

### Does wheel offset matter on a winter package? 

Wheel offset matters on a winter package because it sets how far the tire sits from the suspension and the fender. An offset far from the factory ET can rub the inner arch or push the tire past the bodywork. Keep the winter wheel offset close to the original value and confirm brake clearance before fitting. 

### Are TPMS sensors needed on a second Audi wheel set? 

TPMS sensors are needed on a second Audi wheel set if your car reads pressure from sensors in each wheel. A set without matching sensors can trigger a warning and leave the pressure display blank. Some Audi models use an indirect system that reads wheel speed instead, so confirm which type your car has. 

### What lug nut torque should Audi winter wheels use? 

Lug nut torque for Audi winter wheels follows the value the manufacturer specifies for your model, and the wheel bolts must be tightened in a cross pattern. Torque depends on the bolt size and the wheel, so check the figure in the owner's manual rather than reusing a number from another car. Recheck the torque after the first drive on a new set.
